Advertisement
Quick Links
Advertisement
Related Manuals for Hilti C4/35 MC4
Summary of Contents for Hilti C4/35 MC4
- Page 1 C 4/36 MC4 English Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...
- Page 2 Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...
- Page 3 1 Information about the documentation 1.1 About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product.
- Page 4 For indoor use only Double insulated 1.4 Product information Hilti products are designed for professional use and may be operated, ser- viced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
- Page 5 ▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. ▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
- Page 6 2.2 Battery charger use and care ▶ To avoid injury, use the charger only to charge Hilti Li-ion batteries approved for use with this charger. ▶ The location at which the charger is used should be clean and cool but protected from frost.
- Page 7 Contact Hilti Service after the battery has cooled down. English Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...
- Page 8 3 Description 3.1 Overview of the product Release button with additional Supply voltage LED function (state-of-charge dis- State-of-charge LED & play activation) Battery temperature LED Battery Battery interface 1 Battery state-of-charge LEDs English Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...
- Page 9 3.2 Intended use The product described is a battery charger for Hilti Li-ion batteries with a rated voltage of 7.2 to 36 volts. It is designed to be connected to power outlets providing an AC voltage (alternating current) of 100 to 127 V (depending on country-specific version).
- Page 10 3.3.2 Li-ion battery charge state display Status Meaning 3 LEDs light, 1 LED blinks. • Charge state: 75 % to 100 % 2 LEDs light, 1 LED blinks. • Charge state: 50 % to 75 % 1 LED lights, 1 LED blinks. •...
- Page 11 5.2 Inserting and charging the batteries Note The batteries are charged in the order in which they are inserted, unless electric power to the charger is interrupted. As soon as electric power returns, the battery on the left (interface 1) will be charged first, followed consecutively by the other batteries in interfaces 2 to 4 in numerical order.
-
Page 12: Troubleshooting
2. Pull the battery out of the charger. 6 Troubleshooting If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service. Malfunction Possible cause Action to be taken... - Page 13 • Do not operate the power tool if signs of damage are found or if parts malfunction. Have damage repaired immediately by Hilti Service. • After cleaning and maintenance, refit all guards or protective devices and check that they function correctly.
- Page 14 The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appli- ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 15 Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...
- Page 16 Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...
- Page 17 Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...
- Page 18 Hilti = registered trademark of Hilti Corp., Schaan 20170323 Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05...