Keep these pages open while studying the operating instructions. In these operating instructions, the designation “the appliance” always refers to the C 4/36-350 or C 4/36-90 charger. Operating controls and parts Release button with additional function (charge status dis-...
Serial no.: 2 Description 2.1 Use of the product as directed The appliance is used to charge Hilti Li-ion batteries with a rated voltage of 7.2 to 36 volts. The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
3 Technical data Right of technical changes reserved. Charger C 4/3690 C 4/36350 Cooling Cooling by convec- Active cooling tion Battery Li-ion Li-ion Output voltage 7.2…36 V 7.2…36 V Length of charger Approx. 2 m Approx. 2 m supply cord Weight of appli- 0.6 kg 1.1 kg...
Page 7
4.1.4 Battery charger use and care a) Use the charger only to charge the Hilti batteries approved for use with this charger. b) Do not use a charger if its casing or electric supply cord is defective.
Dirty or dusty appliances should thus be checked at a Hilti service center at regular intervals, especially if used frequently for working on conductive materials.
6 Operation 6.1 Inserting and charging the battery CAUTION This appliance is designed for use with the specified Hilti batteries. Charging other batteries is not permissible. A risk of personal injury or fire and irreparable damage to the battery and charger may otherwise result.
If necessary, the appliance should be repaired by Hilti Service. 7.3 Checking the appliance after care and maintenance After carrying out care and maintenance work on the appliance, check that all protective and safety devices are fitted and that they function faultlessly.
For repair or replacement, send the tool or related parts immedi- ately upon discovery of the defect to the address of the local Hilti marketing organization provided. This constitutes Hilti’s entire obligation with regard to warranty and supersedes all prior or contemporaneous comments and oral or written agreements concerning warranties.
We declare, on our sole responsibility, that this product complies with the following directives and standards: 2006/95/EC, 2004/108/EC, 2011/65/EU, EN 603351, EN 60335229, EN ISO 12100. Hilti Corporation, Feldkircherstrasse 100, FL9494 Schaan Jan Doongaji Paolo Luccini Executive Vice President Head of BA Quality and Process Management Business Unit Power Tools &...