0FR4-0RF
Cleaning the Fixing Unit
The fixing unit may be dirty under the following conditions. In such case, clean the fixing unit.
When black streaks appear on the output
When the toner cartridge is replaced
1
Press [
] (Menu).
2
Select <Adjustment/Maintenance> using [
3
Select <Clean Fixing Unit> using [
4
Check if the supported paper is set in the paper drawer, and press [OK].
5
Check the procedure shown in the display, and press [OK].
Downloaded from ManualsPrinter.com Manuals
] or [
] and press [OK].
] or [
] and press [OK].