Canon i-SENSYS MF6140dn User Manual page 799

Redial Times
Redial Interval
Redial When Err
Occurs
Sender ID
Print Location
Mark No. as:
TEL/FAX
Check Dial Tone
Before Sending
RX Function Settings
Settings
ECM RX
Incoming Ring
Remote RX
Downloaded from ManualsPrinter.com Manuals
You can specify the number of times to redial.
1 to 2 to 10 (times)
"Auto Redial"
You can specify the interval between redials.
*1
2 to 99 (minutes)
"Auto Redial"
You can specify whether to redial when a send error occurs.
Off, On
"Auto Redial"
The sender ID is printed at the top of each page that you are sending, along with the fax
number and sender's name. This helps the recipient to identify the sender.
Off, On
"Sender ID"
Select the location where the Sender ID is printed.
On Image, Above Image
"Sender ID"
Select the text to add in front of the number.
FAX, TEL
"Sender ID"
You can specify whether to dial after checking the dial tone when sending fax documents.
*1
Off , On
"Check Dial Tone Before Sending"
You can specify whether to use ECM.
Off, On
"ECM RX"
Set whether or not to ring the handset or the external telephone when <RX Mode> is set to
<Auto> or <Fax/Tel Auto Switch>.
Off
On:
Ring Times: 1 to 2 to 99
"Incoming Ring"
You can specify whether to use the "remote receiving function" enabling you to receive fax
documents by dialing an ID number even in the middle of a telephone call.
Off
Descriptions
*1
(times)