Preferences - Canon i-SENSYS MF6140dn User Manual

0FR4-0K2

Preferences

NOTE
About the menu options in the following chart
Default settings are highlighted in bold.
For values with "
Sound Volume Control
Settings
Fax Tone
Ring Tone
TX Done Tone
RX Done Tone
Scanning Done Tone
Entry Tone
Downloaded from ManualsPrinter.com Manuals
*1
" mark, the default value varies depending on the country where you are using the machine.
Adjust the sound volume during a fax transmission.
Off
On:
Fax Volume: 1 to 3
"Adjusting the Volume"
Adjust the ring volume when receiving a fax.
Off
On:
Ring Tone Volume: 1 to 3
"Adjusting the Volume"
Adjust the fax sound volume when sending is complete.
Off
On:
TX Done Volume: 1 to 3
Only When Error Occurs:
TX Done Volume: 1 to 3
"Adjusting the Volume"
Adjust the fax sound volume when receiving is complete.
Off
On:
RX Done Volume: 1 to 3
Only When Error Occurs:
RX Done Volume: 1 to 3
"Adjusting the Volume"
Adjust the fax sound volume when scanning is complete.
Off
On
Scanning Done Volume: 1 to 3
Only When Error Occurs:
Scanning Done Volume: 1 to 3
"Adjusting the Volume"
Specify whether or not the machine makes a sound when a key on the operation panel is
pressed.
Descriptions