Canon i-SENSYS MF6140dn User Manual page 857

Action
For information on how to check the network key (WEP key), refer to the instruction manual of the
wireless LAN router or access point, or contact the manufacturer.
Connection failed because the machine uses <Shared Key> authentication while the wireless LAN router
Problem 2
or access point used is set to "Open System" authentication.
Change the WEP authentication method on the wireless LAN router or access point to "Shared Key"
and configure the settings again.
"Setting by Manually Selecting an Access Point"
"Setting by Manually Entering SSID"
For information on how to change authentication method, refer to the instruction manual of the
Action
wireless LAN router or access point, or contact the manufacturer.
If you do not change the wireless LAN routers or access points setup, change the WEP
authentication method on the machine to <Open System> and repeat the setup again.
"Setting by Manually Entering SSID"
<Wireless connection failed.>
Problem An error occurred with the machine during setup resulting in communication failure.
Action 1 Turn OFF the machine and turn it back ON, and then repeat the setup again.
Check network connection.
"Wireless LAN Troubles (MF6180dw Only)"
Action 2
If the access point cannot be determined even after checking the network connection, check the security
settings on the wireless LAN router or access point.
"When security settings on the wireless LAN router/access point are changed"
<WPS connection failed.>
Problem An error occurred while performing setup using the WPS function resulting in failure to connect.
Wait for a while, and set again. If you still cannot connect, check whether the wireless LAN router that you
are using supports WPS function.
WPS supported
Check whether you can connect to the network.
Action
"Check Wireless LAN Information (MF6180dw Only)"
WPS not supported
Set up the machine manually.
"Setting by Manually Selecting an Access Point"
<You can only forward to destinations registered in the address book.>
You attempted to forward the document stored in memory to a destination that is not registered in the
Problem
address book.
Register a destination in the address book.
Action
"Registering Destinations in the Address Book"
Downloaded from ManualsPrinter.com Manuals