Startup Settings
Specifies the waiting time until the network connection is setup.
0 to 300 (sec.)
"Specifying a Delay Before Establishing the Network Connection"
Ethernet Driver Settings
Select the communication method and Ethernet connection type.
"Setting the Speed and Duplex"
Settings
Auto Detect
MAC Address
IEEE802.1X Settings
Uses IEEE802.1X to assigns authentication for the machine.
Off, On
"Switching On/Off for IEEE802.1X Authentication"
Initialize Network Settings
Reset the network settings and restore the settings back to their default settings. Follow the onscreen insructions.
"Initializing the Network Settings"
Downloaded from ManualsPrinter.com Manuals
Specify whether to search automatically.
Off:
Communication Mode: Half Duplex, Full Duplex
Ethernet Type: 10 Base-T, 100 Base-TX
On
"Setting the Speed and Duplex"
A MAC address is a particular number assigned to each communication device (computers,
printers, etc.) connected to a network.
"Checking the MAC Address"
Descriptions