Timer Settings - Canon i-SENSYS MF6140dn User Manual

0FR4-0K3

Timer Settings

NOTE
About the menu options in the following chart
Default settings are highlighted in bold.
The settings marked with
For values with "
For settings or values with "
where you are using the machine.
Time & Date Settings
Settings
Date Display Type
12/24 Hour Clock
Current Time
*A
Settings
Time Zone Settings
*2
Daylight Savings
Sleep Timer
Set a timer to enter the sleep mode after the machine has been idle for a specified length of time.
We recommend that the default settings be used for this feature.
3 to 5 to 60 (min.)
"Setting the Sleep Timer"
Auto Reset Timer
Set a timer to return to the default screen after copying is completed or when key operation is not performed for a certain
period of time.
0 (Off), 1 to 2 to 9 (min.)
Downloaded from ManualsPrinter.com Manuals
*A
cannot be imported or exported via the Remote UI.
*1
" mark, the default value varies depending on the country where you are using the machine.
*2
" mark, the setting or value may be unavailable or vary depending on the country
Descriptions
Select the date display format.
YYYY MM/DD, MM/DD/YYYY, DD/MM YYYY
"Setting the Current Date and Time"
Select the time display format.
12 Hour (AM/PM), 24 Hour
"Setting the Current Date and Time"
Specifies the current time and date.
"Setting the Current Date and Time"
Set the time zone.
GMT-12:00 to GMT 0:00 to GMT+12:00
"Setting the Current Date and Time"
Set the daylight savings time option.
*1
Off
On: Start (M/W/D), End (M/W/D)
"Setting the Current Date and Time"