Canon i-SENSYS MF6140dn User Manual page 849

Problem You are restricted to send a fax to multiple destinations simultaneously.
You need to disable the restriction. Contact your administrator for more information.
Action
"Restricting Sequential Broadcasts"
<Cannot specify a group.>
Problem A group was specified as the destination after the Hook key has been pressed.
Do not press the Hook key when specifying a group destination.
Action
"Basic Procedures for Sending Faxes"
<Cannot use Cloud print (Server auth. failed.)>
Problem Cloud Print is unavailable due to server authentication failure.
Check whether the date and time settings are correctly specified.
Action 1
"Setting the Current Date and Time"
Check whether the CA certificate has expired. If expired, log on to the Remote UI in System Manager
Action 2 Mode and install a CA certificate.
"Specifying Keys and Certificates/CA Certificates"
<Cannot use Cloud print (Server comm. error.)>
Problem Cloud Print is unavailable due to an error.
Check whether the machine is properly installed and correctly connected to the network.
Action 1 "Connecting to Wired LAN"
"Connecting to Wireless LAN (MF6180dw Only)"
A port that is used for Cloud Print may be blocked by a firewall or other protection. Check whether port
Action 2
5222 is available with your computer.
If using a proxy server on the network, check whether the proxy settings for the proxy server and this
Action 3
machine are correct. Contact your network administrator for more information.
<Cannot use Cloud print Check from Remote UI.>
Problem Cloud Print is unavailable due to an error.
Action 1 Check whether you are using a valid Google account.
Check whether the machine is properly registered to Google Cloud Print from Remote UI.
Action 2
"Preparing for Using Google Cloud Print"
<Cannot use USB hub. Check hub.>
Problem USB memory is connected via a USB hub.
Connect supported USB memory directly to this machine.
Action
"Before Using USB Memory Device"
<Cannot write.>
Problem 1 The memory media was disconnected while it was being written to, and writing failed.
Downloaded from ManualsPrinter.com Manuals