Garmin G1000 Reference Manual page 51

Traffic Symbol
traffic information service (tis)
NOTE: If the G1000 is configured to use an optional Traffic Advisory System
(TAS), TIS is not available for use.
NOTE: Traffic Information Service (TIS) is only available when the aircraft is
within the service volume of a TIS capable terminal radar site.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Select the OPERATE Softkey to begin displaying traffic. 'OPERATING' is
displayed in the Traffic Mode field.
4) Select the STANDBY Softkey to place the system in the Standby Mode.
'STANDBY' is displayed in the Traffic Mode field.
5) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
Displaying Traffic on the Navigation Map
1) Ensure TIS is operating. With the Navigation Map displayed, select the
MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
190-00600-02 Rev. A
(intruder is beyond 5 nm and greater than 1200' vertical separation)
Proximity Advisory (PA) (TAS only)
(intruder is within 5 nm and less than 1200' vertical separation)
(closing rate, distance, and vertical separation meet TA criteria)
Traffic Symbol Description
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
Description
Non-Threat Traffic
Traffic Advisory (TA)
Traffic Advisory Off Scale
hazard Avoidance
35