Load A Preset And Print; Make Fine Adjustments Of Preset Setting And Print - Roland VersaUV LEF-20 Master Manual

Load a Preset and Print

Load a media setting saved in presets and
perform printing.
NOTE
Be sure to hold the handle of the front cover,
open and close it gently.
Procedure
1.
Press [MENU] .
MENU
PRESET
2.
Press [ ] twice .
LOAD
DEFAULT
3.
Press [ ] [ ] to select the name of the preset
(setting) you want to load .
Select any one of the 20 types of presets
(when no names have been assigned, select
from among NAME1 through NAME20) or
DEFAULT (DEFAULT is the factory defaults for
each setting).
4.
Press [ENTER] .
SETUP MEDIA
Media setup is cancelled ([SETUP] goes dark).
5.
Open the front cover and secure the media
in place .
" "1. How to Secure the Media (Media Setup)"
(First Step Guide)
6.
Press [SETUP] .
The loaded preset setting is displayed.
HEIGHT:000.0mm
Saving Frequently Used Media Size (Preset Function)
7.
Press [ENTER] .
W:508mm L:330mm
H:100.0mm
MEMO
Every time you make a setup of media, you
can set the print area (base position, range).
For details, refer to "Setting Print Area for
Each Setup of Media" (p. 11).
8.
Start printing .
Printing is made with the loaded preset
setting.
Make Fine Adjustments of
Preset Setting and Print
You can change part of a preset setting and
perform printing.
For instance, you can change the print area
only without changing the media height
setting.
Procedure
1.
1 . Load a preset setting and fix the position
of the media by following the steps 1 to 7 of
"Load a Preset and Print" (p . 7) .
2.
If you want to change the height setting of
the media, set the height of the media .
" The steps 2 to 5 of "2. Setting Height of
Media Automatically" (First Step Guide)
" The steps 4 and 5 of "Setting Height of
Media Manually" (p. 8).
3.
If you want to change the print area, set the
print area .
" "Changing Print Area" (p. 12)
4.
Start printing .
Chapter 1 Fully Utilizing the Machine 7