Replacing The Filter - Roland VersaUV LEF-20 Master Manual

Replacing Consumable Parts

Replacing the Filter

This section explains how to replace the filter
used for the mist fan that adjusts scattering of
ink mist. When the screen displays a message
like the one shown, it means the item needs
to be replaced. Replace with new items.
For information about purchasing filters,
contact your authorized Roland DG Corp.
dealer.
When a warning beep sounds
during filter replacement
A warning beep sounds 10 minutes after
operation begins. Stop work and close the
front cover. Press [ENTER] to quit the filter
replacement menu. After that, restart the
procedure from the beginning.
CAUTION Be sure to perform operations
as
instructions, and never touch
any area not specified in the
instructions .
Sudden
machine may cause injury.
50 Chapter 2 Maintenance
specified in these
movement of the
1 . Enter the FILTER REPLACE Mode
1.
When the message shown in the figure
appears, press [ENTER] .
TIME FOR
FILTER REPLACE
2.
Remove any media .
3.
Press [MENU] .
4.
Press [ ] to display the figure on the below .
MENU
SUB MENU
5.
Press [ ] [ ] in this order .
SUB MENU
MAINTENANCE
6.
Press [ ] [ ] [ ] in this order .
MAINTENANCE
REPLACE FILTER