8.
Right before starting cutting work, set the
anti-falling stop valve to the "Open" position.
9.
Release the mower lock levers (latches) for
mower units #4 and #5.
10.
Set the slight lift switch to the "ON" position.
Note:
Depending on the specifications, this
function may not be available.
11.
Shift the mower unit up/down lever to the
"DOWN" position to lower the mower units.
12.
Set the reel rotation switch to the "Rotate"
position to rotate the reel cutters (cutting
cylinders) for all mower units.
13.
Depress the traveling pedal to start cutting
work.
Note:
During the work, the reel cutters (cutting
cylinders) will rotate or stop in sync with the up
and down motion of the mower units.
Transporting
Transporting Procedure
When loading the machine into a trailer or a
truck to transport it, drive the machine in
reverse. When unloading, drive the machine
forward.
If the roof is installed on the machine, remove it.
The roof may be damaged by wind pressure.
Transporting
Handling Instructions
LM2400
Page 4-35