Baroness LM2400 Owner's Operating Manual page 33

Important
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
1. Engine oil is supplied through the oil filling
port.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level
in between the upper and lower limit lines
on the oil level gauge.
2. Re-place the oil filler cap.
1
Supply of Engine Oil_001
1 Oil filler cap
It will take a while for the supplied engine oil
3.
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
Change of Engine Oil
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Warning
When you change the engine oil, be sure to
drain it into a bowl and discard it in
accordance with local laws and regulations.
Caution
Be careful with hot oil, which could cause
burns if it contacts your skin.
Important
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Inspection Before Use
Handling Instructions
Change the engine oil more frequently if the
engine oil is contaminated and, especially, if
you use the machine in dusty areas or operate
the engine at high loads or in high
temperatures.
Move the machine onto a level surface,
1.
stop the engine, remove the drain plug
while the engine oil is warm, and then drain
the oil into a bowl.
2. Re-place the drain plug.
gui678-005
3. Through the oil filling port, supply new
engine oil until the oil reaches a level in
between the upper and lower limit lines on
the oil level gauge.
Engine oil quantity is approximately 3.1 dm
(3.1 L).
4. Replace the oil filler cap.
1
5. It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
1
Change of Engine Oil_001
1 Drain plug
Change of Engine Oil_002
1 Oil filler cap
Page 4-11
LM2400
gui678-002
3
gui678-005