Radiator; Coolant - Baroness LM2400 Owner's Operating Manual

Radiator

Inspection of Radiator
For details on handling the engine, please refer
to the separate Engine Operating Manual.
1. Make sure that there is no damage to the
radiator.
2. Make sure that the radiator is not
contaminated.
Cleaning of Radiator
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Important
An unclean radiator may cause overheating
or damage to the engine.
It may also cause malfunction of the hydraulic
system.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or coolant leakage.
If the radiator has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
1. Open the radiator cover.
2. Loosen the knobs on the left and right of
the oil cooler, and then tilt the oil cooler.
1
Cleaning of Radiator_001
1 Radiator
2 Oil cooler
Inspection Before Use
3. Carefully clean the front and back of the
radiator with water or compressed air.

Coolant

Inspection of Coolant
For details on handling the engine, please refer
to the separate Engine Operating Manual.
Warning
Do not touch the radiator or coolant during
engine operation or right after the engine has
been turned off.
Due to high temperatures, doing so could
cause burns.
Caution
Inspection should take place after the engine
has well cooled down.
1. Make sure that the coolant level in the
reserve tank is between "Full" and "Low."
2
37k9g1-001
Handling Instructions
1
Inspection of Coolant_001
1 Reserve tank
LM2400
v2x572-003
Page 4-3