Light Switch; Throttle Lever - Baroness LM2400 Owner's Operating Manual

Light Switch

Warning
The lights provide auxiliary lighting.
Do not travel or operate the machine at night
or under poor visibility.
Note:
Depending on the specifications, this function
may not be available.
The light switch is located in the operation
panel.
When the switch is set to the "ON" position, the
lights turn on. When it is set to the "OFF"
position, the lights turn off.
1
Light Switch_001
1 Light switch
A ON
B OFF
Note:
The lights will not turn on when the ignition key
is switched to the "OFF" position.
Operation of Each Section

Throttle Lever

The throttle lever is located in the operation
panel and enables you to adjust the engine rpm.
Move the throttle lever toward "High" (the rabbit
icon) to increase the engine rpm, and toward
"Low" (the turtle icon) to reduce the rpm.
Note:
The factory default engine rpm (maximum) is set
to 3,100 rpm.
A
B
bnec97-006
Handling Instructions
B
1
A
Throttle Lever_001
1 Throttle lever
A High
B Low
LM2400
ef6hsk-008
Page 4-25