Mower Lock Lever (Latch)
Caution
When the mower lock levers (latches) are
engaged, do not operate the mower unit up/
down lever.
The mower lock levers (latches) are located on
the fulcrums of mower units #4 and #5 and are
used when storing the machine with the mower
units raised.
When storing the machine, secure the mower
lock levers (latches).
Mower Lock Lever (Latch)_001
1
Mower lock lever (latch)
Operation of Each Section
1
hchkd1-002
Handling Instructions
Reel rotation switch
Caution
The reel rotation switch must be set just
before you start cutting work. In cases other
than those cases, it must be returned to the
"Stop" position.
The reel rotation switch is located in the
operation panel and operates rotation of the reel
cutters (cutting cylinders) of the mower units.
If you set the reel rotation switch to the "Rotate"
position, the reel cutters (cutting cylinders) of all
mower units will rotate for cutting work. If you
set the reel rotation switch to the "Stop" position,
the reel cutters (cutting cylinders) will stop.
1
Reel Rotation Switch_001
1
Reel rotation switch
A
Rotate
B
Stop
LM2400
A
B
mh4pyw-007
Page 4-27