Fuel Gauge; Pilot Lamps - Baroness LM2400 Owner's Operating Manual

LM2400
Handling Instructions
Remove the load from the engine, idle the
machine for five minutes, stop the engine, and
then inspect the machine and perform any
necessary maintenance.
If the water temperature exceeds 105 degrees
Celsius, a buzzer will sound.(Intermittent tone)
1
Water Temperature Gauge_001
1

Fuel Gauge

The fuel gauge is located in the operation panel.
This instrument indicates the quantity of fuel
inside the fuel tank.
1
Fuel Gauge_001
1
Page 4-32
igozke-001
Water temperature gauge
1 2
1 4 3 4
E F
F U E L
2e4emp-001
Fuel gauge

Pilot Lamps

Charge Lamp
The charge lamp is the left pilot lamp located in
the operation panel.
It turns on when the ignition key is set to the
"ON" position before the engine starts. It turns
off when the engine starts and the alternator
starts operating properly.
If this lamp illuminates while you are operating
the machine, stop the engine immediately, and
then inspect the machine and perform any
necessary maintenance.
1
Charge Lamp_001
1 Charge lamp
ifzqmc-002
Instruments