Table of Contents
Advertisement
Inspection and Maintenance
RECOMMENDED SOLVENTS, SEALANTS AND CLEANERS
GE Company normally supplies lubricants, solvents, and sealants as part of the loose parts for turbine installa-
tion. The listing below includes special items recommended for use during maintenance operations. All may
be procured locally or from the manufacturer.
NAME
Dux Seal
Petrolatum
RTV102 Adhesive
RTV106 Adhesive
Locktite Pipe Sealant
with Teflon
Locktite Plastic Gasket
#47
Never Seeze
Perfect Seal
Contact Cement
Rubber Cement
Paint
Paint
Thinner 1500
Alkyd Resin 05B7A
**WARNING**
Most solvents, sealants and cleaners are flammable at
elevated temperatures. Read and observe manufac-
turer's precautions on substance. Do not substitute
gasoline or unknown substances for the following rec-
ommended items.
DESCRIPTION OR APPLICATION
Non-hardening adhesive plastic compound.
Used on compartment door gaskets to prevent
sticking.
Silicone rubber sealant white paste.
Silicone rubber sealant. Good for high
temperature areas red paste.
Used on all pipe thread joints.
Oil to air sealing joints.
Bolting antiseize compound, low temp.
Gasket sealing compound.
Exhaust system.
Heat exchanger head gaskets.
High temperature aluminum silicone.
Rust inhibitive beige primer. Water reducible
High temperature aluminum paint.
Standard Practices
REFERENCE
158A2557P1
118A449P4
Atlantic Richfield,
Gulf Oil, Humble Oil
or equivalent.
GE Co.
GE Co.
118D5700
226A1482P1
248A5801
K9692676
226A2449
248A5557P1
262A3194P1
262A3195P1
GE Co.
SP-7
Advertisement
Table of Contents
