Support Jack Locations For Compressor And Turbine Casings - GE MS-6001B Maintenance Instructions Manual

Forward
Inlet Bell
Compressor
Casing
Aft
Compressor
Casing
NO. 1 NO. 5
NOTE:
Position No. 5 is not
Required if Compressor
Casing is a Single Piece
Casing. (No Aft Casing)
Figure HGP-D.2. Support Jack Locations for Compressor and Turbine Casings.
Compressor
Exhaust
Discharge Turbine
Frame
Casing Casing
NO. 4 NO. 3
Mechanical Jacks
Turbine – Flange To Flange
Weight = 91,650 lbs.
Jacking Platform