Alfa Romeo 4C spider User Manual page 23

After demisting/defrosting, operate the controls
as normal to restore the required comfort condi-
tions.
NOTE:
The climate control system is very useful for
speeding up and maintaining demisting since it
dehumidifies the air. Adjust the controls as de-
scribed previously and switch on the climate con-
trol system by pressing the A/C button.
Window Demisting
In the event of considerable external moisture
and/or rain and/or large differences in tempera-
ture inside and outside the passenger compart-
ment, perform the following preventive window
demisting procedure:
1. Move the Recirculation Control to
2. Rotate the Temperature Control to the red
section.
3. Turn the Blower Control to 2 (intermediate fan
speed).
4. Turn the Mode Control to
sibility of moving it to position
misting does not occur.
Ventilation
To ventilate the passenger compartment properly,
proceed as follows:
1. Fully open the vents and direct them
appropriately.
2. Rotate the Temperature Control to the blue
section.
3. Move the Recirculation Control to
4. Turn the Blower Control to the desired speed.
5. Turn the Mode Control to
Internal Air Recirculation Activation
• Move the Recirculation Control to
It is advisable to switch the internal air recircula-
.
tion on while standing in queues or in tunnels to
prevent the introduction of polluted air.
Do not use the function for a long time, particu-
larly if there are two people on board, to prevent
the windows from misting.
with the pos-
if window
NOTE:
The internal air recirculation system makes it pos-
sible to reach the required heating or ventilation
conditions more quickly. Do not use the internal
air recirculation function on rainy/cold days to
avoid the possibility of the windows misting.
Climate Control
Proceed as follows:
.
1. Rotate the Temperature Control to the blue
section.
2. Turn the Blower Control to 1 (1st fan speed).
.
For rapid cooling, turn Blower Control to 4
(maximum fan speed).
.
3. Move the Recirculation Control to
4. Turn the Mode Control to
5. Press the A/C button.
Cooling Adjustment
Proceed as follows:
1. Move the Recirculation Control to
2. Rotate the Temperature Control towards the
red section to increase the temperature.
3. Turn the Blower Control counterclockwise to
reduce the fan speed.
.
.
.
21