Alfa Romeo 4C spider User Manual page 168

• You can search for a name by its first letter, first two
letters or first three letters. Press
entering the desired number of letters. A list dis-
plays the names beginning with the entered
letter(s).
Call Waiting Function
If a second call is received during a current call,
you can have the first caller wait momentarily
while you take the second call. When you are
finished with one call, you can switch to the other
one.
If a second call is received during the current call
(call 1), the information of second caller (call 2) is
displayed instead of the current caller's name.
Press Forward, the call waiting mode is
activated.
In this case, call 1 is on hold, while you take call 2.
NOTE:
• In the call waiting mode, press Rewind
Forward to switch between the current call
and the person on hold.
166
• In the call waiting mode, press and hold Rewind
or Forward for at least two seconds to
/ENTER after
hang up call 1 or call 2, and the other call will
be answered automatically. The action depends
on the paired device.
• In the call waiting mode, you can press
VIEW to change the display between wait-
ing number (1 or 2) and caller name.
Preset A Number In The Phone Menu (Shortcut
Dial)
Assign numbers that you dial frequently to presets
for quick recall. You can assign up to six frequently
called phone numbers to number presets.
Select a number you want to preset from the
Phone Menu list (Phone Book, Dialed Call, etc.).
Press and hold any one of the preset buttons
(1 through 6) as the one that you wish to store the
number for at least two seconds.
The phone number you selected is stored in pre-
sets.
or
NOTE:
• If the name has several numbers registered in
the phone book, press
ing the name. Turn the Rotary encoder to
choose the desired number. Press and hold any
one of the preset buttons (1 through 6) for at
least two seconds. The selected number is
stored as a preset number.
• A total of 18 phone numbers can be stored in
the preset memory (6 numbers for each Smart-
phone in the paired device list). If a Smart-
phone is deleted from the paired device list, the
stored preset numbers of this Smartphone are
deleted, even when it is paired again.
• If you store a phone number in a preset with a
previously stored number, the current number
will be cleared and replaced by the new one.
Adjusting Volume
To adjust the volume, turn the Rotary encoder to
set the desired sound level.
Call Switching Operation
While making a call, this function allows you to
initiate the transfer of the audio between the
Smartphone and the speakers in the vehicle.
While calling, press BAND or press and hold
for at least two seconds to switch the call sound
between the unit and Smartphone.
/ENTER after select-