Alfa Romeo 4C spider User Manual page 157

Access the settings using the following procedure:
1. Press and hold AUDIO/SETUP for at least two
seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select General, and
press /ENTER.
3. Turn the Rotary encoder to select Clock Mode,
and press /ENTER.
Setting The clock Display
You can select the clock display type, 12-hour or
24-hour, depending on your preference.
Setting The AUX SETUP Mode
You can input the audio of an external device,
(such as a Portable audio player) to the AUX
connector of this unit.
Setting The AUX NAME Mode
You can change the AUX NAME display in the
SETUP mode.
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is con-
nected, audio will be automatically muted when-
ever the interrupt signal is received from the de-
vice. Make sure the Audio Interrupt In Lead (Pink/
Black) is connected to the terminal where the
voltage becomes 0 V (GND) when a sound from
External Unit is input into AUX. Otherwise, this
function may not operate.
Play Mode
This unit can play back CDs containing both CD
and MP3/WMA/AAC data (created in Enhanced
CD (CD Extra) format). However, in some situa-
tions, playback of an enhanced CD may be diffi-
cult. In this case, you can select playback of a
single session only, containing the CD data. When
a disc contains both CD and MP3/WMA/AAC
data, playback starts from the CD data portion of
the disc.
NOTE:
Perform this setting before inserting a disc. If a
disc has already been inserted, remove it first.
Setting The Stay On Mode
You can set the delay in turning OFF the unit's
power after the vehicle's ignition is turned off (ACC
OFF). When you select a mode other than OFF, the
music will be paused after you turn the ignition key
off (ACC OFF). At the same time, the prompt
"PRESS PRESET 6 TO STAY ON" will scroll once.
Press 6 within 15 seconds to continue enjoying
music for the selected period. If 6 is not pressed,
the unit will power off within 15 seconds. During
this period, you can only receive a call by operat-
ing a paired Smartphone.
Demonstration
This unit has a demonstration mode to display its
various functions.
Display Setting
The following settings can be adjusted in Display
Settings:
• Illuminati
• Dimmer
• Scroll Setting
• Scroll Type Setting
Access the settings using the following procedure:
1. Press and hold AUDIO/SETUP for at least two
seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select Display, and
press /ENTER.
3. Turn the Rotary encoder to select Illumination,
and press /ENTER.
155