Alfa Romeo 4C spider User Manual page 163

ON:
Enable recognition of this unit from the Bluetooth
compatible device.
1. Press and hold AUDIO/SETUP for at least two
seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select "Bluetooth",
and then press /ENTER.
3. Turn the Rotary encoder to select Visible Mode
and then press /ENTER.
4. Turn the Rotary encoder to select either OFF or
ON (Initial setting) and press
5. Press and hold AUDIO/SETUP for at least two
seconds to return to normal mode.
Setting The Bluetooth Sound Quality
You can flexibly customize the sound of a call to fit
your own preferences.
1. Press and hold AUDIO/SETUP for at least two
seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select "Bluetooth",
and then press /ENTER.
3. Turn the Rotary encoder to select Call Sound
and then press /ENTER.
4. Turn the Rotary encoder to select either VOL LV
ADJ or Type Setup and press
5. Press and hold AUDIO/SETUP for at least two
seconds to return to normal mode.
Adjusting The Volume (SOURCE VOL)
You can emphasize or weaken the volume level of
the Phone call, the ring tone and the microphone
input to fit your own preferences.
Sound Auto Setting (TYPE SET)
Depending on your calling environment, choose
/ENTER. one of the settings below which gives the best
sound quality. Refer to the Alpine Radio Supple-
ment for further details.
Setting the Caller Information Display ON/OFF
You can choose whether to use these functions
according to the following setting.
1. Press and hold AUDIO/SETUP for at least two
seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select "Bluetooth",
and then press
3. Turn the Rotary encoder to select Caller ID and
then press
4. Turn the Rotary encoder to select either OFF or
/ENTER.
5. Press and hold AUDIO/SETUP for at least two
If you want to keep the ID information of the caller
from others, set this item to OFF. Depending on the
stored ID information, while you are dialing a
number or a call is dialing in, only the telephone
number will be displayed or the telephone name
will be displayed as "NO Name"; During a call,
"NO Name" will be displayed.
Setting The Phone Book Update
You can update the phone book automatically or
manually.
1. Press and hold AUDIO/SETUP for at least two
2. Turn the Rotary encoder to select "Bluetooth",
3. Turn the Rotary encoder to select PB Update
4. Turn the Rotary encoder to select either Auto or
/ENTER.
5. Press and hold AUDIO/SETUP for at least two
/ENTER.
ON (Initial setting) and press
seconds to return to normal mode.
seconds to activate the SETUP mode.
and then press /ENTER.
and then press /ENTER.
Manual and press /ENTER.
seconds to return to normal mode.
/ENTER.
161