Alfa Romeo 4C spider User Manual page 160

Bluetooth is a wireless technology allowing com-
munication between a mobile device or personal
computer over short distances. This enables a
hands-free call or data transmission between
Bluetooth compatible devices. Bluetooth trans-
mission is available in the unlicensed 2.4 GHz
spectrum if the distance between devices is within
10 meters. For details, refer to the Bluetooth
Home page www.Bluetooth.com.
Before Using Bluetooth Function
Before using the Bluetooth function it must be
paired with this unit, set "Bluetooth IN" to ON
when you want to use Hands-Free phone or
Bluetooth Audio function. Refer to the Alpine Ra-
dio Supplement for further details.
General Information
The following regulatory statement applies to all
Radio Frequency (RF) devices equipped in this
vehicle:
This device complies with Part 15 of the FCC Rules
and with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following
two conditions
1. This device may not cause harmful interfer-
ence, and
158
2. This device must accept any interference re-
ceived, including interference that may cause
undesired operation.
NOTE:
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user's authority to operate the equip-
ment.
Phone Pairing
How To Connect To A Bluetooth Compatible
Device (Pairing)
For details on the control from a Bluetooth com-
patible device, refer to the Owner's Manual of the
Bluetooth compatible device.
Pairing a Bluetooth compatible device with SSP
(Secure Simple Pairing)
1. Using your Bluetooth compatible device, se-
lect the "Alpine CD Receiver" for pairing.
2. Turn the Rotary encoder to change the head
unit display from "Pairing NO" to "Pairing YES, "
and then press /ENTER.
If "Pairing NO" is selected, the connection will
be canceled.
3. If the pairing was successful, "Connected" is
displayed for a few seconds. The head unit
then returns to its previous state.
Pairing a Bluetooth compatible device without
SSP (Secure Simple Pairing)
1. Using your Bluetooth compatible device, se-
lect the "Alpine CD Receiver" for pairing.
2. Input the passcode ("0000") in a Bluetooth
compatible device.
NOTE:
The passcode is fixed as "0000. "
3. If the pairing was successful, "Connected" is
displayed for a few seconds. The head unit
then returns to its previous state.
NOTE:
• If the connection is unsuccessful, "Failed" is
displayed.
• After a successful pairing, the two devices
should reconnect automatically whenever the
vehicle's ignition is turned ON. If the auto con-
nection fails, try to reconnect manually.
• Set "Visible Mode" to ON to enable this unit to
be recognized by a Bluetooth compatible de-
vice.