Alfa Romeo 4C spider User Manual page 151

Hide thumbs Also See for 4C spider:
Table of Contents

Advertisement

You can flexibly customize the radio to suit your
own preferences and usage. The following settings
can be adjusted in Audio Settings:
• Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left And Right)/
Fader (Between Front And Rear)/Defeat
• Audio Setup
• About Time Correction
• About The Crossover
Adjusting The Subwoofer
Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left And Right)/Fader
(Between Front And Rear)/Defeat
1. Press AUDIO repeatedly to choose the desired
mode. Each press changes the mode as
follows:
• SUBWOOFER LEVEL*1/*2
• BASS LEVEL *2*3
• TREBLE LEVEL *2*3
• BALANCE
• FADER *4
• DEFEAT
• VOLUME
*1 When the Subwoofer mode is set to OFF, its
level cannot be adjusted.
*2 Not displayed when BASS ENGINE SQ
mode is selected.
*3 Adjustable only when DEFEAT is OFF.
*4 Not displayed when 2WAY/3WAY system
mode is set to 3WAY.
Subwoofer Level
0 ~ 15
Bass Level
−7 ~ 7
Treble Level
−7 ~ 7
Balance
−15 (L) ~ 15 (R)
Fader
−15 (R) ~ 15 (F)
Defeat
ON/OFF
Volume
0 ~ 35
NOTE:
If no operation is performed for five seconds,
the unit automatically returns to normal
mode.
2. Turn the Rotary encoder until the desired
sound is obtained in each mode.
NOTE:
By setting DEFEAT ON, previously adjusted level
settings of BASS and TREBLE will return to the
factory defaults.
Audio Setup
You can customize the unit to suit your own pref-
erence and usage. From the AUDIO SETUP menu,
Audio Setting can be modified.
• Use steps 1 through 5 to select the category
you wish to modify. For details on how to change
each setting, see the following sections below:
1. Press and hold AUDIO/SETUP for at least two
seconds to activate the SETUP mode.
2. Turn the Rotary Encoder to select Audio, and
then press
/ENTER.
The following selections will be available:
• EQ PRESETS *1/*2/*3
• BASS ENGIN *4/*5
• PARAMETER *5/*6
• 9BAND P-EQ *1/*3/*7
• SOURCE VOL
• X-OVER *1/*3
149

Advertisement

Table of Contents
loading

Table of Contents