Alfa Romeo 4C spider User Manual page 172

Checking The SiriusXM Radio ID Number
To subscribe to the SiriusXM Satellite Radio ser-
vice, it is necessary to locate and identify the
Radio ID of your SiriusXM Tuner. The Radio ID
contains eight characters and can be found on the
bottom of your SiriusXM Tuner or can be displayed
on when selecting Channel 0 by following the
steps below:
1. While in the Satellite Radio Mode, press
or to select channel "0. "
The unit displays "RADIO ID" and ID number
at the same time.
NOTE:
The Radio ID does not include the letters I, O,
S or F.
2. To cancel the ID number display, select a
channel other than "0. "
Presets
Storing Channel Presets
1. Press BAND to select the desired band you
want to store the preset in.
There are 3 Satellite Radio Preset bands.
170
Each press of BAND changes the band:
SiriusXM1, SiriusXM2, SiriusXM3 or SiriusXM1.
2. Tune to the desired channel, and then press
and hold (for at least two seconds) one of the
preset buttons (1 through 6) to store the
channel.
The display then shows the stored Band and
preset number (for example, SiriusXM1-3 is
shown when preset 3 of BAND1 is selected).
3. Repeat the procedure to store up to 5 other
channels onto the same band.
NOTE:
• A total of 18 channels can be stored in the
preset memory, 6 Channels for each band
(SiriusXM1, SiriusXM2 and SiriusXM3).
• If you store a new channel into a preset which
already has a channel assigned, the current
channel will be cleared and replaced with the
new one.
Tuning Channels Using Presets
1. Press BAND to select the desired band of
Presets you wish to access.
2. Press the preset buttons (1 through 6) that has
your desired Satellite Radio channel stored in
memory.
Storing The Desired Artist And Song Alerts
While listening to SiriusXM Satellite Radio, you
can be alerted when your favorite songs or artists
are playing on other channels. An interruption
Alert will be displayed when a matching artist or
song is found on another channel. For receiving
interruption Alert information, refer to "Receiving
and Tuning to an Alert. "
1. Press and hold /ENTER/OPTION for at
least 2 seconds when a Song or the song of an
Artist you want to store is playing.
The Option mode is activated.
2. Turn the Rotary encoder to select Alert
Memory, and then press /ENTER.
3. Turn the Rotary encoder to choose Save Artist?
or Save Song? (when available), and then
press /ENTER.
NOTE:
If both the artist name and song title are not
available to save, Artist/Song will be displayed.