Alfa Romeo 4C spider User Manual page 173

4. The new alert was stored in memory.
An "Artist/Song Saved" pop-up screen is fol-
lowed by an "X U(sed)/Y E(mpty)".
X is the total number of song titles or artist
names stored in memory, and Y is the total
number of memory locations still available for
storage.
NOTE:
• If you try to store when the memory is full,
"Memory Full" is displayed followed by
"Replace/Cancel. " If you want to replace an
existing alert item, select "Replace" by turning
Rotary encoder, and then press
the existing alert list stored in memory is dis-
played. Select one of the stored alerts using the
Rotary encoder. To replace the selected alert,
/ENTER and an "Artist/Song Saved"
press
pop-up screen is followed by an "X U(sed)/Y
E(mpty). "
• You can manage the stored Alert memory set-
ting on Setup mode, for details, refer to "Man-
aging Artist and Song Alerts. "
• If no operation is performed for 60 seconds, the
setting mode is canceled.
Receiving And Tuning To An Alert
Whenever a stored sports team, artist, or song is
playing on another channel, an interruption Alert
appears on the unit display. To tune to the game,
artist or song identified by the alert, follow the
steps below:
1. Turn the Rotary encoder to select the desired
game, artist or song from the list of active
alerts.
2. Press /ENTER.
NOTE:
• If no operation is performed for five seconds,
/ENTER,
the unit returns to normal mode.
• Sports teams/Artist name and Song title which
you have stored and which are currently playing
will be displayed in a category called "My
Music"/"My Games" in search mode. For de-
tails, refer to "Search Function. "
Search Function
You can search for SiriusXM programming content
by Category or by Channel.
1. Press /ENTER in the SiriusXM mode.
2. Turn the Rotary encoder to select the desired
Category, and then press /ENTER.
3. Turn the Rotary encoder to select the desired
Channel Name, and then press
Using Jump Memory And Jump Recall Function
1. While in SiriusXM mode, select your favorite
SiriusXM Channel.
2. Press and hold for at least two seconds.
The channel you selected is stored as the
Jump Source.
3. Press and hold BAND for at least two seconds
to recall, and then tune to the saved Jump
Source channel.
NOTE:
• Pressing and holding BAND again for at least
two seconds will jump back to the previous
mode or SiriusXM channel.
• During saved Jump Source channel playing,
search function, channel up/down, etc. are not
available.
/ENTER.
171