Alfa Romeo 4C spider User Manual page 174

Reply Function
In SiriusXM mode, you can pause, rewind and
replay of live SiriusXM Satellite Radio.
1. While listening to a SiriusXM channel,
press to enter the Replay mode, which
mutes the audio.
The display will show "
mode.
2. Press again to resume playback of the
stored audio from the point at which it was
paused.
During playback, the SiriusXM Tuner will con-
tinue to store the channel audio until you exit
the Replay mode.
During REPLAY playback:
•
• Fast rewind: Press and hold
•
• Fast forward: Press and hold
•
• Returning to the beginning of the current
song: Press .
•
• Advancing to the beginning of the next
song: Press .
172
NOTE:
•
If you continue to press Fast forward until
the end, the Replay mode is canceled, and
the unit will change to live SiriusXM radio
mode.
•
If you change channels while in Replay
mode, the unit will exit Replay mode to live
" while in this
Satellite Radio mode and clear the Replay
memory.
3. Press to cancel the REPLAY mode.
The unit returns to live SiriusXM radio mode.
Storing iTunes Tagging Information
iTunes Tagging lets you tag songs heard on
SiriusXM channels. Use this unit in conjunction
with an optional SiriusXM Tuner and a Tagging
compatible iPod/iPhone to tag the music that you
.
listen to. This tag information is automatically
.
transferred to your iPod/iPhone. Later, when your
iPod/iPhone is connected to iTunes, you can pre-
view, buy and download your tagged songs. For
details, refer to the Owner's Manual of the Tagging
compatible iPod/iPhone.
The Tag indicator will light when a song playing on
a SiriusXM channel has tag information available.
Press and hold VIEW for at least two seconds
to save its tag information.
If no iPod/iPhone is connected, "Tag Count X" is
displayed (X is the total amount of the tag infor-
mation stored in this unit).
NOTE:
• During tagging, the iPod/iPhone takes priority
to save the tag information. If no iPod/iPhone is
connected, the tag information is saved to this
unit.
• When the memory of iPod/iPhone is full, "iPod
Full" and "Tag Count X" are displayed. The tag
information will be stored to the unit.
• If the operation is failed, "Cannot Tag" is dis-
played.
• This unit can store up to 50 tagged songs.When
the memory of the unit is full, "Tag Count50"
and "Memory Full" are displayed.
• When an iPod that doesn't support the tagging
function is connected, "Non-Tagging iPod" is
displayed.
• When the iPod/iPhone is disconnected from
the unit during tagging, its tag information will
be stored in the unit.