Alfa Romeo 4C spider User Manual page 135

Setting The Time And Calendar
1. Press and hold AUDIO/SETUP for at least two
seconds to activate the SETUP selection
mode.
2. Turn the Rotary encoder to select the General
mode, and then press /ENTER.
3. Turn the Rotary encoder to select Clock Adjust,
and then press /ENTER.
4. Turn the Rotary encoder to set year.
5. Press /ENTER.
6. Repeat steps 4 and 5 above to set month,
date, hour and minute.
7. Press and hold AUDIO/SETUP for at least two
seconds to return to normal mode.
NOTE:
Pressing returns to the previous SETUP mode.
If no operation is performed for 60 seconds,
SETUP is canceled.
Detaching And Attaching The Front Panel
Detaching
1. Turn off the unit power.
2. Press the open button to open the front panel.
3. Grasp the front panel firmly, slide to the left,
and then pull to remove.
NOTE:
The front panel may become hot in normal usage
(especially the connector terminals on the back of
the front panel). This is not a malfunction.
To protect the front panel, place it in the supplied
carrying case.
When detaching the front panel, do not apply
excessive force as it may result in a malfunction.
Do not leave the front panel open, or drive the
vehicle with the panel open as it may result in an
accident or malfunction.
Refer to your Alpine Radio Supplement for further
information.
Attaching
1. Insert the right side of the front panel into the
main unit. Align the groove on the front panel
with the projections on the main unit.
2. Push the left side of the front panel until it
locks firmly into the main unit.
NOTE:
Before attaching the front panel, make sure that
there is no dirt or dust on the connector terminals
and no foreign objects between the front panel
and the main unit.
Attach the front panel carefully, holding the sides
of the front panel to avoid pushing buttons by
mistake.
Refer to your Alpine Radio Supplement for further
information.
133