Bluetooth Audio; Playback; Auxiliary Device (Optional); Operating Auxiliary Devices (Optional) - Alpine i109ED Owner's Manual

01GB00i109ED-i109AD.book Page 38 Tuesday, October 18, 2016 5:50 PM

BLUETOOTH Audio

If a BLUETOOTH compatible mobile phone, portable player, etc. is
connected by wireless, you can play back a song (operation is
controllable from the unit).
Display example for BLUETOOTH Audio main screen
• If there is no Bluetooth device connects to this unit, you can make the
connection directly by touching [
screen is displayed. Please refer to "Connecting a BLUETOOTH
Device" on page 31 to add a device.
• To play back audio, a mobile phone or a portable player conforming
to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
• During a call, sound on the BLUETOOTH audio source is paused.

Playback

1
Press and hold
seconds to recall the Home screen.
2
Touch [BT Audio].
3
Touch [ ] or [ ] to select the desired track.
4
To pause playback, touch [ ].
Touch [ ] to resume playback.
38
-EN
01GB06i109ED-i109AD.fm
]. The Bluetooth device list
(CAR) button for at least 2
Auxiliary Device
(Optional)

Operating Auxiliary Devices (Optional)

To operate devices connected to the AUX RCA terminals or Mini Jack
Connector of this unit, follow the procedure described below.
• Set "Setting the AUX Mode" (page 23) to "AUX RCA" or "Mini
Jack".
• Depending on the connected unit, the onscreen buttons may not
work, or their operation may differ.
• If you try to activate the video screen while driving, the display will
show the warning-For your safety, video playback is only available
while the vehicle is parked.
1
Press and hold (CAR) button for at least 2
seconds to recall the Home screen.
2
Touch [AUX].
The AUX mode screen is displayed.
AUX Operation Screen Display During Video File
Playback (AUX RCA Only)
1
Touch the screen.
The AUX operation screen is displayed.
Example for AUX Video mode display (AUX RCA
Only)
• The operation screen changes to the visual screen in the AUX
mode for 5 seconds after an operation has been performed. To
hide the AUX operation screen, touch the video display area.
Touch the display panel to display the operation screen
again.
2
Touch [Wide] to change the display mode or touch
[Sound] to set the sound.
For more details, please refer to "Switching Display Modes"
on page 18 and "Sound Setup" (page 24)
ALPINE i109ED/i109AD 68-30368Z97-A (EN)