Repeat Playback; Searching By Title Number; Searching Directly By Chapter Or Track - Alpine i109ED Owner's Manual

01GB00i109ED-i109AD.book Page 19 Tuesday, October 18, 2016 5:50 PM
3
Touch the desired display mode
In Wide mode, the monitor displays a normal picture wider to fit
in a wide-screen monitor by evenly stretching out the picture
horizontally.
In Cinema mode, the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16:9 ratio.
In Normal mode, the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.

Repeat Playback

Use this function to play the disc's titles, chapters or tracks etc.,
repeatedly.
DVD Video
1
Touch [>] to change the function guide.
2
Touch [Repeat].
The repeat mode switches every time the button is touched.
The chapter is played repeatedly.
Chapter
The title is played repeatedly.
The playback returns to normal mode.
Off
• Display may vary depending on the disc.
Video CD
1
Touch [>] to change the function guide.
2
During playback, touch [Repeat].
The repeat mode switches every time the button is touched.
01GB05i109ED-i109AD.fm
The track is played repeatedly.
Track
Playback does not repeat.
Off
• Display may vary depending on the disc.
• The track/disc repeat modes cannot be used on Video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off. See "Setting the Video CD Play Mode" on page 30.
• For some discs it is not possible to switch the repeat mode.

Searching by Title Number

Use this function to easily find positions on the DVD using the DVD's
title number.
1
Touch [>] to change the function guide while
playback is stopped.
2
Touch [Menu Control] to display the menu
operation mode screen.
3
Touch [Key].
The numeric keypad input mode screen appears.
4
Enter a desired title by touching its title number.
See page 17 for operation of the numeric keypad.
5
Confirm your selection by touching [Enter].
Playback will start from the title number selected.
• This function cannot be used on discs on which no title numbers are
recorded.
• Some disc may not accept any operation.

Searching Directly by Chapter or Track

Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
During playback, touch [>] to change the function
guide.
For DVD Video :
2-1
Touch [Menu Control] to display the menu
operation mode screen.
2-2
Touch [Key].
The numeric keypad input mode screen will appear.
For Video CD :
2
Touch [Track Search].
The numeric keypad input mode screen will appear.
3
Touch and enter the chapter or track number you
want to play.
See page 17 for operation of the numeric keypad.
ALPINE i109ED/i109AD 68-30368Z97-A (EN)
19
-EN