Table of Contents
Advertisement
Powertrain warning lamp
Vehicles with an automatic
transmission
If the powertrain warning lamp
comes on when the engine is
running, this indicates either a
malfunction or a high transmission
temperature. Stop your vehicle as soon as
it is safe to do so and carry out the
following:
1.
Select P or N and allow the engine to
idle for 10 minutes.
2. Switch the ignition off and restart the
engine.
If the powertrain warning lamp comes on,
switch the ignition off and have the
transmission checked before continuing
your journey.
If the powertrain warning lamp does not
come on, continue your journey and have
the transmission checked as soon as
possible.
Vehicles with a 5-speed manual
transmission or Durashift EST
If the powertrain warning lamp
comes on when the engine is
running, this indicates a
malfunction. The engine will continue to
run but it will have limited power. Have this
checked as soon as possible.
If the powertrain warning lamp flashes
when the engine is running, this indicates
a malfunction. Stop your vehicle as soon
as it is safe to do so. Have this checked
before continuing your journey.
Rear fog lamp indicator
It will illuminate when you switch
the rear fog lamps on.
Instrument Cluster
Stability control (ESP) warning
lamp
does not illuminate or illuminates
continuously while driving, this indicates a
malfunction. During a malfunction, the
system switches off. Have the system
checked by a properly trained technician
as soon as possible.
If you switch ESP off, the warning lamp will
illuminate. The lamp will go out when you
switch the system back on or when you
switch the ignition off.
52
While driving, it flashes during
activation of the system. After
switching on the ignition, if it
Advertisement
Table of Contents
