Table of Contents
Advertisement
pressing the PHONE button on the
audio unit
using the ACCEPT option in the menu.
Rejecting an incoming call
Incoming calls can be rejected by either:
pressing the reject button
pressing one of the following buttons
on the audio unit: CD, AM/FM
using the REJECT option in the menu.
Note: You cannot reject an incoming call
using the remote control MODE button.
Handling a second incoming call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call, whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted
by either:
Pressing the accept button.
Pressing the MODE button on the
remote control.
Pressing the PHONE button on the
audio unit.
Using the ACCEPT option in the menu.
Note: This will cancel the ongoing call.
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing either:
The teject button
one of the following buttons on the
audio unit: CD, AM/FM.
Telephone
Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
1.
Press the PHONE button on the audio
unit.
2. Using the ACTIVE PHONE option in
the menu, select the active phone from
the list using the preset buttons.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1.
Press the PHONE button on the audio
unit.
2. Select the DEBOND option in the
menu.
3. Select the phone from the list by using
the preset buttons.
Note: After bonding a Bluetooth phone to
the system, this becomes the active phone.
However, in some cases the Bluetooth
phone has to be activated by pressing the
appropriate station button on the audio or
navigation unit.
162
Advertisement
Table of Contents
