Table of Contents
Advertisement
Leave the engine running while the kit
is in use, but not if the vehicle is in an
enclosed or poorly ventilated area (for
example, inside a building). In these
circumstances, switch the compressor
on with the engine turned off.
Replace the sealant bottle with a new
one before the expiry date (see top of
bottle) is reached.
Inform all other users of the vehicle
that the tyre has been temporarily
sealed with the tyre repair kit and make
them aware of the special driving
conditions to be observed.
Inflating the tyre
WARNINGS
Check the sidewall of the tyre prior
to inflation. If there are any cracks,
bumps or similar damage, do not
attempt to inflate the tyre.
Do not stand directly beside the tyre
while the compressor is pumping.
Watch the sidewall of the tyre. If any
cracks, bumps or similar damage
appear, turn off the compressor and
let the air out by means of the pressure
relief valve I. Do not continue driving with
this tyre.
The sealant contains natural rubber
latex. Avoid contact with skin and
clothing. If this happens, rinse the
affected areas immediately with plenty of
water and contact your doctor.
If the tyre inflation pressure does not
reach 1.8 bar (26 psi) within 10
minutes, the tyre may have suffered
excessive damage, making a temporary
repair impossible. In this case, do not
continue driving with this tyre.
Wheels and Tyres
I
H
E102881
1.
122
G
A
Label
B
Sealant bottle
C
Sealant bottle hose
D
Bottle holder
E
Pressure gauge
F
Power plug with cable
G
Compressor switch
H
Repair kit hose
I
Pressure relief valve
Remove the tyre repair kit from the
wrapping.
A
B
C
D
E
F
Advertisement
Table of Contents
