Using The Telephone - Vehicles With: Travel Pilot Ex - Ford FUSION 2011 Owner's Manual

4. Scroll through the different phones by
using the seek buttons and display the
phone to be debonded.
5. Press the MENU button to select the
phone which is to be debonded.
USING THE TELEPHONE -
VEHICLES WITH: TRAVEL
PILOT EX
This chapter describes the phone functions
of the Navigation System TravelPilot EX.
Note: Refer to your Navigation System
TravelPilot EX guide for details of the
controls.
An active phone must be present.
Even if connected to the Navigation
System TravelPilot EX, your phone can still
be used in the usual way.
Making a call
Dialling a number - cradle phone
Using the cradle phone allows you to
access your mobile phone address book.
The entries will appear in the TravelPilot
EX display.
1. Press the PHONE button on the audio
unit.
2. Using the PHONEBOOK option in the
menu.
3. Choose one of the letter areas.
4. Turning the right rotary entry control,
select the desired phone number.
5. By pressing the INFO button the details
of the phonebook entry can be
displayed.
6. Press the right rotary entry control
button.
Telephone
Dialling a number - Bluetooth phone
Using the Bluetooth phone, phone
numbers can be dialled using voice control,
refer to the Voice control chapter.
Ending a call
Calls can be ended by either:
pressing the reject button
pressing the MODE button on the
remote switch
pressing the off button on the
navigation system
pressing the right rotary entry control
button.
Redialling a number - cradle phone
1. Press the PHONE button on the audio
unit.
2. Press the MENU button.
3. Select the CALL OUT list, CALL IN list
or REDIAL.
4. Press the PHONE button on the audio
unit to dial the desired phone number.
Redialling a number - Bluetooth phone
1. Press the PHONE button on the audio
unit.
2. Press the MENU button.
3. Select REDIAL.
4. Press the PHONE button on the audio
unit to dial the phone number.
Handling an incoming call
Accepting an incoming call
Incoming calls can be accepted by either:
pressing the accept button
pressing the MODE button on the
remote control
161