Table of Contents
Advertisement
pressing the PHONE button
pressing the MODE button on the
remote control
pressing the call accept button.
Rejecting an incoming call
Incoming calls can be rejected by either:
pressing the call reject button
pressing the CD button
pressing the AM/FM button.
Note: If you have an audio unit with a
telephone keypad you can only reject a call
with the call reject button.
Note: You cannot reject an incoming call
using the remote control.
Handling a second incoming call
Note: The second incoming call function
must be activated in your phone.
If there is an incoming call whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted
by either:
pressing the call accept button
pressing the MODE button on the
remote control
pressing the PHONE button.
Note: This will cancel the ongoing call.
Rejecting a second incoming call
Second incoming calls can be rejected by
pressing either:
pressing the call reject button
pressing the CD button
pressing the AM/FM button.
Telephone
Note: If you have an audio unit with a
telephone keypad you can only reject a call
with the call reject button.
Changing the active phone
Note: Phones must be bonded to the
system before they can be made active.
Using the station storage button
1.
Press the PHONE button on the audio
unit.
2. Press the preset number required
(using the station preset buttons 1 - 6).
Note: This process is only for audio units
without a telephone keypad.
Using the audio unit menu
1.
Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
3. Select the ACTIVE PHONE option on
the audio unit.
4. Scroll through the different stored
phones by using the seek buttons to
display the bonded phones.
5. Press the MENU button to select the
phone which is to be the active phone.
Note: After bonding a Bluetooth phone to
the system, this becomes the active phone.
Debonding a bonded phone
A bonded phone can be deleted from the
system at any time, unless a phone call is
in progress.
1.
Press the PHONE or call accept
button.
2. Press the MENU button on the audio
unit.
3. Select the DEBOND option on the
audio unit.
160
Advertisement
Table of Contents
