Table of Contents
Advertisement
GENERAL INFORMATION ON
RADIO FREQUENCIES
CAUTIONS
The radio frequency used by your
remote control can also be used by
other short distance radio
transmissions (e.g. amateur radios,
medical equipment, wireless headphones,
remote controls and alarm systems). If the
frequencies are jammed, you will not be
able to use your remote control. You can
lock and unlock the doors with the key.
Check your vehicle is locked before
leaving it unattended. This will
safeguard against any potential
malicious frequency blocking.
Note: You could unlock the doors if you
press the buttons on the remote control
unintentionally.
The operating range between your remote
control and your vehicle varies depending
on the environment.
PROGRAMMING THE REMOTE
CONTROL
A maximum of four remote controls
(including the ones supplied with the
vehicle) can be programmed.
E72191
Keys and Remote Controls
To programme a new remote control:
Turn the ignition key to position II four
times within six seconds.
Switch off the ignition. A tone sounds
to indicate that it is now possible to
programme a new remote control.
Press any button on a new remote
control. A tone will sound as
confirmation. Repeat this last step for
all of your remote controls, including
the original.
Switch the ignition back on or wait for
ten seconds without programming
another remote control to end remote
control programming. Only the remote
controls which you have just
programmed are now able to lock and
unlock your vehicle.
Re-programming the unlocking
function
You can change the unlocking function so
that pressing the unlock button once
deactivates the central locking or double
locking, disarms the anti-theft alarm
system and unlocks the driver's door.
Pressing the unlock button twice within
three seconds also unlocks the passengers'
doors.
If you want the tailgate to be locked while
driving, press the locking button on the
driver's door to activate central locking.
E72190
25
Advertisement
Table of Contents
