Chorus 0 Delay; Flanger 0 Delay - Roland RD-2000 Parameter Manual

Parameter Value
Delay HF 200–8000 [Hz],
Damp BYPASS
Delay D100:0W–
Balance # D0:100W
Level 0–127

60: CHORUS 0 DELAY

Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Switch OFF, ON
Depth Knob
CHORUS RATE,
CHORUS
BALANCE,
DELAY FEEDBACK,
DELAY BALANCE
Rate Knob
OFF,
CHORUS RATE,
Feedback CHORUS
Knob BALANCE,
DELAY FEEDBACK,
DELAY BALANCE
Chorus Pre
0.0–100 [msec]
Delay
Chorus Rate
OFF, ON
(sync sw)
Chorus Rate
0.05–10.00
(Hz) #/
Chorus Rate
note (p. 60)
(note) #
Chorus Depth 0–127
Chorus
D100:0W–
Balance # D0:100W
Delay Time
OFF, ON
(sync sw)
Delay Time
1–2600 [msec]
(msec)/
Delay Time
note (p. 60)
(note)
Explanation
Adjusts the frequency
above which sound fed
back to the effect will be cut
(BYPASS: no cut).
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not
sent through the delay (D).
Output Level
Balance D
Balance W
Delay
Balance W
Feedback
Balance D
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
[Hz]
Frequency of modulation
Depth of modulation
Volume balance between
the direct sound (D) and the
chorus sound (W)
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
Adjusts the delay time from
the direct sound until the
delay sound is heard.
Parameter
Delay
Feedback #
Delay HF
Damp
Delay
Balance #
Level
L out

61: FLANGER 0 DELAY

Balance D
L in
R out
R in
Balance D
Parameter
Switch
Depth Knob
Rate Knob
Feedback
Knob
Flanger Pre
Delay
Flanger Rate
(sync sw)
Flanger Rate
(Hz) #/
Flanger Rate
(note) #
Flanger
Depth
Flanger
Feedback #
Flanger
Balance #
Modulation FX Parameters –
Value Explanation
Adjusts the proportion of the
delay sound that is fed back
-98–+98 [%]
into the effect. Negative
settings will invert the phase.
Adjusts the frequency
200–8000 [Hz], above which sound fed
BYPASS back to the effect will be cut
(BYPASS:
Adjusts the volume balance
between the sound that is
D100:0W–
sent through the delay (W)
D0:100W
and the sound that is not
sent through the delay (D).
0–127 Output Level
Balance D
Feedback
Balance W
Flanger
Delay
Balance W
Feedback
Balance D
Value Explanation
OFF, ON Turns the effect on/off.
Specifies the parameter
that is controlled by the
FLN RATE,
MODULATION FX [DEPTH]
FLN FEEDBACK,
knob.
FLN BALANCE,
Specifies the parameter
DELAY FEEDBACK,
that is controlled by the
DELAY BALANCE
MODULATION FX [RATE]
knob.
OFF,
FLN RATE, Specifies the parameter
FLN FEEDBACK, that is controlled by the
FLN BALANCE, MODULATION FX [FEEDBACK]
DELAY FEEDBACK, knob.
DELAY BALANCE
Adjusts the delay time from
0.0–100 [msec] the direct sound until the
flanger sound is heard.
If this is ON, the modulation
is synchronized to the tempo
OFF, ON
of the rhythm (owner's
manual: p. 24).
0.05–10.00 [Hz]
Frequency of modulation
note (p. 60)
0–127 Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back
-98–+98 [%]
into the effect. Negative
settings will invert the phase.
Volume balance between
D100:0W–
the direct sound (D) and the
D0:100W
flanger sound (W)
"-"
no cut).
L out
Balance W
Balance W
R out
"-"
59