Enhancer; Auto Wah; Humanizer - Roland RD-2000 Parameter Manual

Modulation FX Parameters

15: ENHANCER

Controls the overtone structure of the high frequencies, adding
sparkle and tightness to the sound.
L in
Enhancer
R in
Enhancer
Parameter Value
Switch OFF, ON
Depth Knob
SENS,
MIX
Rate Knob
OFF,
Feedback
SENS,
Knob
MIX
Sens # 0–127
Mix # 0–127
Low Gain
-15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127

16: AUTO WAH

Cyclically controls a filter to create cyclic change in timbre.
L in
Auto Wah
R in
Auto Wah
Parameter Value
Switch OFF, ON
Depth Knob
MANUAL,
SENS,
RATE,
DEPTH,
PHASE
Rate Knob
OFF,
MANUAL,
Feedback
SENS,
Knob RATE,
DEPTH,
PHASE
Filter Type LPF, BPF
40
2-Band
L out
EQ
Mix
2-Band
R out
EQ
Mix
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Sensitivity of the enhancer
Level of the overtones
generated by the enhancer
Gain of the low range
Gain of the high range
Output Level
L out
2-Band EQ
R out
2-Band EQ
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Type of filter
LPF: The wah effect will
be applied over a wide
frequency range.
BPF: The wah effect will
be applied over a narrow
frequency range.
Parameter Value
Manual # 0–127
Peak 0–127
Sens #
0–127
Polarity
UP, DOWN
Rate
OFF, ON
(sync sw)
Rate (Hz) #/ 0.05–10.00
Rate (note) # note (p. 60)
Depth #
0–127
Phase # 0–180 [deg]
Low Gain -15–+15 [dB]
High Gain
-15–+15 [dB]
Level 0–127

17: HUMANIZER

Adds a vowel character to the sound, making it similar to a human
voice.
L in
Overdrive
R in
Parameter Value
Switch
OFF, ON
Depth Knob
DRIVE,
RATE,
DEPTH,
MANUAL,
PAN
Rate Knob
OFF,
DRIVE,
Feedback RATE,
Knob
DEPTH,
MANUAL,
PAN
Drive Sw OFF, ON
Explanation
Adjusts the basic frequency
at which the effect is applied.
Adjusts the amount of the
wah effect that will occur
in the range of the basic
frequency.
Set a higher value for Q
to narrow the range to be
affected.
Adjusts the sensitivity with
which the filter is controlled.
Sets the direction in which
the frequency will change
when the auto-wah filter is
modulated.
UP: The filter will change
toward a higher
frequency.
DOWN:
The filter will
change toward a lower
frequency.
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
[Hz]
Frequency of modulation
Depth of modulation
Adjusts the degree of phase
shift of the left and right
sounds when the wah effect
is applied.
Gain of the low range
Gain of the high range
Output Level
Pan L
2-Band
Formant
EQ
Pan R
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Turns Drive on/off.
L out
R out