Ds 0 Chorus; Ds 0 Flanger; Ds 0 Delay; Od/Ds 0 Twah - Roland RD-2000 Parameter Manual

Modulation FX Parameters
Parameter Value
OFF,
OVERDRIVE DRIVE,
Feedback
OVERDRIVE PAN,
Knob
DELAY FEEDBACK,
DELAY BALANCE
Overdrive
0–127
Drive #
Overdrive
L64–63R
Pan #
Delay Time
OFF, ON
(sync sw)
Delay Time
1–2600 [msec]
(msec)/
Delay Time
note (p. 60)
(note)
Delay
-98–+98 [%]
Feedback #
Delay HF 200–8000 [Hz],
Damp
BYPASS
Delay
D100:0W–
Balance # D0:100W
Level
0–127

52: DS 0 CHORUS

The parameters are essentially the same as in
with the exception of the following two.
5 Overdrive Drive 0 Distortion Drive
5 Overdrive Pan 0 Distortion Pan
L in
Distortion
R in

53: DS 0 FLANGER

The parameters are essentially the same as in
FLANGER, " with the exception of the following two.
5 Overdrive Drive 0 Distortion Drive
5 Overdrive Pan 0 Distortion Pan
L in
Distortion
R in
56
Explanation
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Degree of distortion
Also changes the volume.
Stereo location of the
overdrive sound
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
Adjusts the delay time from
the direct sound until the
delay sound is heard.
Adjusts the proportion of the
delay sound that is fed back
into the effect. Negative
settings will invert the phase.
Adjusts the frequency
above which sound fed
back to the effect will be cut
(BYPASS: no cut).
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not
sent through the delay (D).
Output Level
"49: OD 0 CHORUS, "
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
"50: OD 0
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D

54: DS 0 DELAY

The parameters are essentially the same as in
with the exception of the following two.
5 Overdrive Drive 0 Distortion Drive
5 Overdrive Pan 0 Distortion Pan
L in
Distortion
R in

55: OD/DS 0 TWAH

L in
Overdrive/
Distortion
R in
"-"
Parameter
Switch
Depth Knob
Rate Knob
Feedback
Knob
Drive Switch
Drive Type
Drive #
Tone #
Amp Switch
Amp Type
TWah Switch
TWah Filter
Type
"51: OD 0 DELAY, "
Balance D
Delay
Feedback
Balance D
Amp Touch 2-Band
Simulator Wah
Value Explanation
OFF, ON Turns the effect on/off.
Specifies the parameter
that is controlled by the
DRIVE,
MODULATION FX [DEPTH]
TONE,
knob.
TWAH SENS,
TWAH MANUAL,
Specifies the parameter
TWAH PEAK,
that is controlled by the
TWAH BALANCE
MODULATION FX [RATE]
knob.
OFF,
DRIVE,
Specifies the parameter
TONE,
that is controlled by the
TWAH SENS,
MODULATION FX [FEEDBACK]
TWAH MANUAL,
knob.
TWAH PEAK,
TWAH BALANCE
Turns overdrive/distortion
OFF, ON
on/off
OVERDRIVE,
Type of distortion
DISTORTION
Degree of distortion
0–127
Also changes the volume.
Sound quality of the
0–127
Overdrive effect
Turns the Amp Simulator on/
OFF, ON
off.
Type of guitar amp
SMALL: small amp
SMALL,
BUILT-IN:
BUILT-IN,
amp
2-STACK,
2-STACK:
3-STACK
amp
3-STACK:
amp
OFF, ON Wah on/off
Type of filter
LPF:
Produces a wah effect in
LPF, BPF a broad frequency range.
BPF: Produces a wah effect in
a narrow frequency range.
L out
Balance W
Balance W
R out
L out
EQ
R out
single-unit type
large double stack
large triple stack