Od 0 Chorus; Od 0 Flanger; Od 0 Delay - Roland RD-2000 Parameter Manual

49: OD 0 CHORUS

L in
Overdrive
R in
Parameter Value
Switch OFF, ON
Depth Knob
OVERDRIVE DRIVE,
OVERDRIVE PAN,
CHORUS RATE,
CHORUS
BALANCE
Rate Knob
OFF,
OVERDRIVE DRIVE,
Feedback
OVERDRIVE PAN,
Knob CHORUS RATE,
CHORUS
BALANCE
Overdrive
0–127
Drive #
Overdrive
L64–63R
Pan #
Chorus Pre
0.0–100.0
Delay
Chorus Rate
OFF, ON
(sync sw)
Chorus Rate
0.05–10.00
(Hz) #/
Chorus Rate
note (p. 60)
(note) #
Chorus Depth 0–127
Chorus D100:0W–
Balance #
D0:100W
Level 0–127

50: OD 0 FLANGER

L in
Overdrive
R in
Parameter Value
Switch OFF, ON
L out
Balance D
Balance W
Chorus
Balance W
R out
Balance D
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Degree of distortion
Also changes the volume.
Stereo location of the
overdrive sound
Adjusts the delay time from
[msec] the direct sound until the
chorus sound is heard.
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
[Hz]
Frequency of modulation
Depth of modulation
Adjusts the volume balance
between the sound that is
sent through the chorus (W)
and the sound that is not
sent through the chorus (D).
Output Level
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Explanation
Turns the effect on/off.
Parameter Value
Depth Knob
OVERDRIVE DRIVE,
OVERDRIVE PAN,
FLN RATE,
FLN FEEDBACK,
FLN BALANCE
Rate Knob
OFF,
OVERDRIVE DRIVE,
Feedback OVERDRIVE PAN,
Knob
FLN RATE,
FLN FEEDBACK,
FLN BALANCE
Overdrive
0–127
Drive #
Overdrive
L64–63R
Pan #
Flanger Pre
0.0–100 [msec]
Delay
Flanger Rate
OFF, ON
(sync sw)
Flanger Rate 0.05–10.00
(Hz) #/
Flanger Rate note (p. 60)
(note) #
Flanger
0–127
Depth
Flanger
-98–+98 [%]
Feedback #
Flanger D100:0W–
Balance # D0:100W
Level 0–127

51: OD 0 DELAY

L in
Overdrive
R in
Parameter Value
Switch
OFF, ON
Depth Knob
OVERDRIVE DRIVE,
OVERDRIVE PAN,
DELAY FEEDBACK,
DELAY BALANCE
Rate Knob
Modulation FX Parameters
Explanation
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Degree of distortion
Also changes the volume.
Stereo location of the
overdrive sound
Adjusts the delay time from
the direct sound until the
flanger sound is heard.
If this is ON, the modulation
is synchronized to the tempo
of the rhythm (owner's
manual: p. 24).
[Hz]
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative
settings will invert the phase.
Adjusts the volume balance
between the sound that is
sent through the flanger (W)
and the sound that is not
sent through the flanger (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
"-"
55