Sdd-320 - Roland RD-2000 Parameter Manual

Settings common to all Modulation FX
Parameter Value
Refer to the effect
Type
list (p. 34).
MOD FX 0 TR/
AMP
,
Routing
TR/AMP 0 MOD
FX
1: CE-1
This models the classic BOSS CE-1 chorus effect unit. It provides a
chorus sound with a distinctively analog warmth.
L in
CE-1
R in
Parameter Value
Switch
OFF, ON
Depth Knob
INTENSITY, LEVEL
Rate Knob
Feedback OFF, INTENSITY,
Knob Level
Intensity # 0–127
Low Gain -15–+15 [dB]
High Gain
-15–+15 [dB]
Level # 0–127

2: SDD-320

This models Roland's DIMENSION D (SDD-320). It provides a clear
chorus sound.
L in
SDD-320
R in
Explanation
Specifies the type of
Modulation FX.
The editable parameters will
depend on the effect type
that's selected.
Lets you select the routing of
the Modulation FX and the
Tremolo/Amp Simulator.
By switching the Routing
type, you can change the
effect that's applied to the
sound.
For example, suppose that
you chose Chorus as the
MOD FX and chose E. PIANO
for TR/AMP; with the MOD
FX 0 TR/AMP setting, the
chorus sound will be output
in mono, but with the TR/
AMP 0 MOD FX setting it
will be output in stereo.
2-Band EQ L out
R out
2-Band EQ
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Chorus depth
Gain of the low range
Gain of the high range
Output Level
2-Band EQ L out
R out
2-Band EQ
Parameter Value
Switch OFF, ON
Depth Knob
LEVEL, MODE
Rate Knob
Feedback
OFF, LEVEL, MODE
Knob
1, 2, 3, 4, 1+4, 2+4,
Mode #
3+4
Low Gain
-15–+15 [dB]
High Gain -15–+15 [dB]
Level # 0–127
3: RE-201
A virtual tape echo that produces a realistic tape delay sound. This
simulates the tape echo section of a Roland RE-201 Space Echo.
L in
Direct Level
Tape Echo
R in
Direct Level
Parameter Value
Switch OFF, ON
Depth Knob
REPEAT RATE,
INTENSITY,
ECHO LEVEL,
DIRECT LEVEL
Rate Knob
OFF, REPEAT RATE,
Feedback INTENSITY,
Knob ECHO LEVEL,
DIRECT LEVEL
S, M, L, S+M, S+L,
Mode
M+L, S+M+L
Repeat Rate # 0–127
Intensity # 0–127
Bass -15–+15 [dB]
Modulation FX Parameters
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Switches the mode.
Gain of the low range
Gain of the high range
Output Level
L out
Echo Level
Echo Level
R out
Explanation
Turns the effect on/off.
Specifies the parameter
that is controlled by the
MODULATION FX [DEPTH]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [RATE]
knob.
Specifies the parameter
that is controlled by the
MODULATION FX [FEEDBACK]
knob.
Combination of playback
heads to use
Select from three different
heads with different delay
times.
S:
short
M:
middle
L:
long
Tape speed
Increasing this value will
shorten the spacing of the
delayed sounds.
Amount of delay repeats
Boost/cut for the lower range
of the echo sound
35