Usb Interface Configuration Wizard - D-Link DVA-5582 User Manual

Section 3 - Configuration

USB Interface Configuration Wizard

Select Default APN: Select a default APN (Access Point Name) to connect to your 3G/4G
network. If your APN is not listed, you can create a new one by
choosing the last option on this lis. You may skip this step, but your
3G/4G connection may not function properly until it is configured.
If you select New Access Point Name, the following options will
appear:
Name:
Select a name to identify your APN. This name is for your reference
and has no effect on network settings.
PLMN Code: Enter the PLMN Code (public land mobile network code) associate
with your carrier. This information should be provided by your carrier.
URL:
Enter the address for your carrier's APN. This information should be
provided by your carrier.
Dial: Enter the number to dial to initiate the connection. By default, this
is *99#. This information should be provided by your carrier.
Clicking Next will prompt you to configure PPP (USB) on page 19.
Click Cancel to return to the homescreen, or Back to return to the previous screen.
D-Link DVA-5582 User Manual
Operator
Access Point Names
18