Chapter 4. Configuring Via Web-Based Interface; Initial Configuration Wizard - D-Link DSL-2750U User Manual

DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN Support
User Manual
CHAPTER 4.
INTERFACE

Initial Configuration Wizard

To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DSL-2750U and click the NEXT button.
Click the START button.
CONFIGURING
Figure 18. Restoring the default settings in the Wizard.
Figure 19. Checking connection to the wireless network.
Figure 20. Starting the Wizard.
Page 32 of 173
Configuring via Web-based Interface
VIA WEB-BASED