Section 3 - Configuration
Wireless Access Point (Cont)
Select Yes to enable Wi-Fi Protected Setup (WPS) as a quick-and-easy
WPS Enabled:
way to setup an encrypted wireless network.
Configuration
Select a WPS configuration method. As of this writing, the firmware
Methods:
only supports WPS Push Button for security reasons.
Your router provides support for WPA2 Enterprise for use in some corporate
environments. WPA2 Enterprise relies on RADIUS (Remote authentication Dial-In User
Service). If your network uses WPA2 Enterprise, you will have the following additional
options. This is provided for reference only and home users should generally choose
Radius Server
Enter the address of your RADIUS authentication server here.
Address:
Radius Server Port:
Enter the port number of your RADIUS server here. Default is 1812
Radius Secret:
Enter your RADIUS secret here.
Secondary Radius
Enter the address of your backup RADIUS authentication server here.
Server Address:
Secondary Radius
Enter the port of your backup RADIUS authentication server here.
Server Port:
The default port is 1812.
Secondary Radius
Enter your secondary RADIUS secret here.
Secret:
Click Apply to save settings and continue to the Configuration Wizard Summary on page 30.
Click Close to return to the previous page.
D-Link DVA-5582 User Manual
Wi-Fi Protected Setup
WPA2 Enterprise
29