Configuring Via Web-Based Interface; Initial Configuration Wizard - D-Link DWR-980 User Manual

DWR-980 Wireless AC1200 4G LTE Router
with VDSL2 Support, Gigabit Ethernet Ports,
2 FXS Ports, and USB Port
User Manual
CHAPTER 4.
INTERFACE

Initial Configuration Wizard

To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network DWR-980 (for operating in the 2.4GHz band) or DWR-980-
5G (for operating in the 5GHz band) and click the NEXT button.
Click the START button.
CONFIGURING
Figure 29. Restoring the default settings in the Wizard.
Figure 30. Checking connection to the wireless network.
Figure 31. Starting the Wizard.
Page 50 of 372

Configuring via Web-based Interface

VIA WEB-BASED