Configuration Wizard; Configuration Wizard: Phase 1 - D-Link DVA-5582 User Manual

Section 3 - Configuration
If your router has not come preconfigured from your ISP, or if your connection defaults
have been changed, you will need to complete the Configuration Wizard in order
to access the internet. The wizard consists of two phases: setting the default WAN
(Internet connection) and configuring Wi-Fi settings.
Note: If you are configuring a DSL connect, be sure to have your ISP's configuration
information on hand. Configuring a DSL connection requires a high level of technical
knowledge and advanced concepts beyond the interface are beyond the scope of
this manual.
Click Next to start the configuration wizard, or Cancel to return to the homescreen.
Note: If a default connection is already configured, those settings will be erased once
you click Next on the phase one screen. To edit existing settings, click Cancel return
to the Home screen and select the relevant connection type instead. You can also
choose to Skip Phase 1, preserving your WAN settings, and move directly to Phase
2 to configure Wi-Fi settings.

Configuration Wizard: Phase 1

Click Next to configure your Internet connection. or click Skip to proceed directly
to Phase 2 to configure you Wi-Fi settings. Clicking Cancel will return to the Home
screen and discard any changes.
D-Link DVA-5582 User Manual
Home

Configuration Wizard

11