Ipv6 Interface Settings - D-Link DVA-5582 User Manual

Section 3 - Configuration

IPv6 Interface Settings

Select Yes to enable IPv6 on this WAN connection, or No to disable
Enable IPv6:
it. IPv6 is disabled by default.
Enable Neighbor Select Yes to enable the Neighbor Discovery Protocol (NDP) to allow
your router to more easilly detect other nodes on the WAN, or No to
Discovery:
disable. This feature is enabled by default if IPv6 is enabled.
This option enables IPv6 across all interfaces.
Note: IPv6 is disabled by default. In order to use IPv6, the protocol stack must be
enabled by enabling global IPv6.
Click Next to see a summary of your configuration and save your settings.
Click Cancel to return to the home screen or Back to return to the previous screen.
D-Link DVA-5582 User Manual 25