Default Settings Mode And Options - Epson DFX-9000 Repair Manual

Epson DFX-9000 Field Repair Guide

Default Settings Mode and Options

Power-On Default Settings Mode
With the printer off hold the
power on the printer. If the LCD indicates:
SETTINGS MODE you have entered default settings
mode. Within the default settings mode you have three
menus to select from using the
buttons. Once the desired menu has been selected use
the Font & Pitch buttons to scroll through the menu.
Once the desired setting to changed has been located
use the Tear off & Top of form
setting.
Powering off the unit will save the settings.
Control Panel Map
Font button down & then
Tear off & Top of form
buttons to change the
Printer Component, Software Item,
Default Settings Menu Options
Forms w/labels
Panel lock out
Print settings
LCD Display,
1. Label base pos - Paper left edge, First dot.
2. Label top pos - 0/216 inches to 4752/216 inches
3. Label length - 0/216 inches to 4752/216 inches
4. Label left pos - 0/120 inches to 1440/120 inches.
5. Label width - 0/120 inches to1440/120 inches.
6. Base sheet PG - 0 to14.
7. Label paper PG - 0 to 14.
1. Pause - Unlock, lock.
2. Micro feed - Unlock, Lock.
3. Load - Unlock, Lock.
4. LF - Unlock, Lock.
5. FF - Unlock,Lock.
6. Top of Form - Unlock, Lock.
7. Tear Off - Unlock, Lock.
8. Font - Unlock, Lock.
9. Pitch - Unlock, Lock.
10. Front/Rear - Unlock, Lock.
11. Menu - Unlock, Lock.
12. Reset - Unlock, Lock.
1. Print settings
Printer Button
3/29/07
Page 5.